Problem Solved! If you are reading this, you probably know that the original model 60 plastic globes are no longer in production and you won't be able to get them anymore. If you want to continue to use your machine and get parts, you will need to update it to the Super 60. This listing will give you EVERYTHING you need to convert your machine. Included is a Super 60 globe, center rod, top lid, and screws. This will convert your Northwester 60, A&A PN95, A&A PM Elite, Ashland, Curtis, and other similar machines.

The globe is brand new. The lid will be in used condition or will be a new raw metal lid and you will likely want to spray paint it the color of your machine. We do this to keep costs down. We sell a lot of these and use stock photos. The color lid you will receive is random depending on what we have in stock. Painting them is easy, just clean it off and spray it. It only takes 30 seconds. If you want to pay extra for a new powder coated lid, let me know what color and we can work that out.

Instructions for converting. Total project time is less than 5 minutes. Remove your old globe, gaskets, globe rods, center rod, and lock barrel from old lid. Install new rod, lock barrel in new lid, set one of your gaskets on top of your brush housing and then place globe on top of gasket. Depending on how old your machine is, you may or may not have 4 holes tapped in the corners of the hopper that line up with the globe holes. The screws your receive are self-drilling so that even if there aren't holes there, you can create your own without a drill bit. Screw globe down and you are done! Super easy!